Phantom Flex post workflow
Here are simple instructions to follow:
* Phantom RAW .cine file names must be 8 characters MAXIMUM, without
duplication (can exclude underscores in this)
It is helpful to use Day, camera, mag & clip name identification eg
1_A_01_001.cine would be Day 1, camera A, mag 01, clip 001
However, if all the clips are in order, then you could use 0001.cine,
0002.cine etc....
* The file name of the transcoded clips used in AVID/ FCP must match
EXACTLY the .cine file
Eg. 1_A_01_001.cine must be transcoded to 1_A_01_001.mov prior to
ingesting into the AVID/FCP.
* If using AVID, clip names MUST NOT BE CHANGED in the Bin
* Clip name comments MUST be used in the EDL.
Clip name comments should reflect clip used: eg: *FROM CLIP:
1_A_01_001.mov
* Timecode of each clip MUST start at 00:00:00:00
This is the default of FCP for QuickTimes with no timecode, but for AVID
this will be 01:00:00:00, in which case an ALE (Avid Log Exchange) file
must be used to import files with zero hour timecode.
* Post House for CGI must be provided with the RAW .cine files
* EDL must be in CMX 3600 format